多机箱系统
1. 将 68 针屏蔽式电缆的一端连接 DAQ 通信设备。
2. 将电缆另一端与机箱（ID n 标识为 FROM DAQ BOARD OR PREVIOUS CHASSIS）的
SCXI-1346 连接。
3. 将 68 针屏蔽式电缆与机箱 n 标识为 TO NEXT CHASSIS 的 SCXI-1346 连接。
4. 将电缆另一端与机箱 （ID n+1，标识为 FROM DAQ BOARD OR PREVIOUS
CHASSIS）中的 SCXI-1346 连接。
5. 请重复第 3 和第 4 步安装其它机箱 （后一个机箱除外）。
6. 将 68 针屏蔽式电缆连接倒数第二个机箱 （该机箱的插槽标识为 TO NEXT
CHASSIS）。
7. 将电缆另一端与后一个机箱的 SCXI-1349 连接。
1 SCXI-1000、 SCXI-1001 或 SCXI-1000DC 机箱
2 SCXI-1346 电缆适配器
3 与 TO NEXT CHASSIS 连接的屏蔽式电缆
4 与 FROM DAQ BOARD OR PREVIOUS CHASSIS 连接的屏蔽式电缆

Multi chassis system
1. Connect one end of 68 pin shielded cable to DAQ communication equipment.
2. Connect the other end of the cable to the bottom of the chassis (ID n is from DAQ board or prior chassis)
Scxi-1346 connection.
3. Connect the 68 pin shielded cable with scxi-1346 marked to next chassis.
4. Connect the other end of the cable to the chassis (ID n + 1, identified as from DAQ board or predecessor)
Scxi-1346 connection in chassis).
5. Please repeat steps 3 and 4 to install other chassis (except the last chassis).
6. Connect the 68 pin shielded cable to the penultimate chassis (the slot of the chassis is marked to next)
CHASSIS）。
7. Connect the other end of the cable to the scxi-1349 of the last chassis.
1. Scxi-1000, scxi-1001 or scxi-1000dc chassis
2 scxi-1346 cable adapter
3 shielded cable connected with to next chassis
4 shielded cable connected to from DAQ board or previous chassis