KDV1.3-100-220/300
如果连接的电机没有
控制正确。
危险运动有多种原因：
•接线或电缆连接故障
•组件操作不当
•测量值变送器和主探测器有缺陷
•有缺陷的部件
•软件中的错误
这些错误可能发生在设备刚刚打开或
在一段不确定的时间之后。
驱动器组件中的监视器实际上排除了连接驱动器中的故障。然而，人员安全要求采取额外措施以确保正确操作。驱动运动故障
在安装的监控器生效之前，不能完全排除受控制类型和运行状态影响的情况

Dangerous movements can be caused if the connected motors are not controlled correctly. There are various causes of dangerous movements: • faulty wiring or cable connections • operating the components improperly • defective measured value transmitters and primary detectors • defective components • errors in the software These errors can occur just after the equipment has been switched on or after an indefinite period of time. The monitors in the drive components virtually exclude failure in the connected drives. However, personnel safety requires that additional measures be taken to ensure correct operation. Faulty drive motions which are influenced by the type of control and the operating status cannot be entirely excluded until the installed monitors take effect