AS-B824-000
文件传输未正确初始化以前的文件传输已中止。E 1112 0配置锁定被拒绝外部工具试图锁定驱动器的配置以进行上载或下载。这可能不起作用，因为另一个工具已锁定驱动器的配置，或者驱动器处于不允许锁定的操作状态。E 1113 0系统未锁定以进行配置传输外部工具尝试在不锁定驱动器的情况下传输配置。E 1114 4配置下载中止参数\u SIGLATCH位5在配置下载期间，检测到通信错误或外部工具中的错误。配置仅部分传输到驱动器，现在可能不一致。关闭/打开驱动器电源，然后重试下载配置或恢复出厂设置。E 1115 0错误的配置文件格式参数\u WarnLatched Bit 5外部工具下载了格式不正确的配置。E 1116 0请求被异步处理E 1117 0对模块的异步请求阻止请求被阻止，因为模块当前正在处理另一个请求。E 1118 0配置数据与设备不兼容配置数据包含来自不同设备的数据。验证设备类型，包括功率级类型。E 1119 0数据长度不正确，字节太多E 111A 0数据长度不正确，字节数不足E 111B 4配置下载错误在配置下载过程中检测到（附加信息=Modbus寄存器地址），驱动器不接受一个或多个配置值。验证配置文件是否有效，以及是否与驱动器的类型和版本匹配。附加错误信息中的值显示检测到初始化错误的参数的Modbus寄存器地址。E 111C 1无法初始化缩放的重新计算无法初始化参数。可以通过参数\u标准杆数\u ScalingError读取导致检测到错误的参数的地址。E 111D 3在使用用户定义的单位重新计算参数期间检测到错误后，无法恢复参数的原始状态。重新计算开始前，驱动器包含无效配置。重新计算期间检测到错误。关闭并再次打开驱动器电源。这可以帮助您识别受影响的参数。根据需要更改参数。在开始重新计算过程之前，请验证参数配置是否有效。E

File transfer not correctly initialized A previous file transfer has been aborted. E 1112 0 Locking of configuration denied An external tool has tried to lock the configuration of the drive for upload or download. This may not work because another tool had already locked the configuration of the drive or the drive is in an operating state that does not allow locking. E 1113 0 System not locked for configuration transfer An external tool has tried to transfer the configuration without locking the drive. E 1114 4 Configuration download aborted Parameter _SigLatched Bit 5 During a configuration download, a communication error or an error in the external tool was detected. The configuration was only partially transferred to the drive and might be inconsistent now. Power the drive off/on and retry to download the configuration or restore the factory settings. E 1115 0 Incorrect configuration file format Parameter _WarnLatched Bit 5 An external tool has downloaded a configuration which has an incorrect format. E 1116 0 Request is processed asynchronously E 1117 0 Asynchronous request blocked Request to a module is blocked because the module is currently processing another request. E 1118 0 Configuration data incompatible with device The configuration data contains data from a different device. Verify device type including type of power stage. E 1119 0 Incorrect data length, too many bytes E 111A 0 Incorrect data length, insufficient number of bytes E 111B 4 Configuration download error detected (additional info=Modbus register address) During a configuration download, one or more configuration values were not accepted by the drive. Verify that the configuration file is valid and matches the type and version of the drive. The value in the additional error info shows the Modbus register address of the parameter where the initialization error was detected. E 111C 1 Not possible to initialize recalculation for scaling A parameter could not be initialized. The address of the parameter that caused the detected error can be read via the parameter _PAR_ScalingError. E 111D 3 Original state of a parameter cannot be restored after an error was detected during recalculation of parameters with user-defined units. The drive contained an invalid configuration before the recalculation was started. An error was detected during the recalculation. Power the drive off and on again. This may help you to identify the affected parameter(s). Change the parameters as required. Verify that the parameter configuration is valid before starting the recalculation procedure. E