VDI1511S
S60传感器用于
直接安装在
恒温器背面，带
提供的硬件。这
将恒温器转换为
安装在管道上的恒温器。
S70传感器可以
直接安装在电源上
或通风管道的回流。
恒温器可能位于
在有温度的墙上
从遥控S70感应。
S60管道传感器适配器
S70管道安装传感器
[22.8毫米]
0.9"
[40.6毫米]1.6英寸
0.5英寸[12.7毫米]3.77英寸[95.8毫米]
1.275"
[71毫米]2.8“
宽度：4.5英寸（114毫米）
[22.8毫米]
0.9"
（95.8毫米）
3.77"
此传感器可安装在
任何偏远位置的墙。
恒温器可能位于
在管道或其他位置，
温度感应来自
S80传感器位置。
S80房间传感器
此传感器用于控制
热水或冷水或其他液体。
它可以安装在标准
¼”井或皮带安装在
管采用316材质
不锈钢。

The S60 sensor is made to be mounted directly onto the back of the thermostat, with the supplied hardware. This transforms the thermostat into a duct-mounted thermostat. The S70 sensor can be mounted directly onto the supply or return of the ventilation duct. The thermostat may be located on the wall with temperature sensing from the remote S70 . S60 Duct Sensor Adaptor S70 Duct Mount Sensor [22.8 mm] 0.9" [40.6 mm] 1.6" 0.5"[12.7 mm] 3.77"[95.8 mm] 1.275" [71 mm] 2.8" WIDTH: 4.5"( 114 mm ) [22.8 mm] 0.9" ( 95.8 mm ) 3.77" This sensor can be mounted on the wall in any remote location. The thermostat may be located on the duct or other location, with temperature sensing from the S80 sensor location. S80 Room sensor This sensor is for the control of hot or cold water, or other fluids. It can be mounted in a standard ¼” well or strap mounted to a pipe. It is constructed with 316 stainless steel.