51306511-175 BCC-PAIN01
在某一点上改变条件所造成的延迟
在系统中，或其所处的其他条件中
相关的此外，传感响应延迟
控件的元素，因为
感测元件，用于感测所感测数据的变化
变量
负荷：在加热或冷却系统中，热传递
系统将被要求提供。此外
系统必须执行的工作。
操纵变量：调节的数量或条件
通过自动控制系统使
受控变量的变化。
测量变量：测量的变量，可以是
受控（例如，测量排放空气
仅测量受控室外空气）。
基于微处理器的控制：一种运行的控制电路
使用微处理器执行
逻辑和控制功能，如操作继电器
或提供输出信号以定位致动器。
电子设备主要用作传感器。这个
控制器通常提供灵活的DDC和能量
管理控制例行程序。
调节：通过分钟增量和
递减。
偏移：控制点和
比例控制系统的设定值
稳定的工作条件。

A delay in the effect of a changed condition at one point in the system, or some other condition to which it is related. Also, the delay in response of the sensing element of a control due to the time required for the sensing element to sense a change in the sensed variable. Load: In a heating or cooling system, the heat transfer that the system will be called upon to provide. Also, the work that the system must perform. Manipulated variable: The quantity or condition regulated by the automatic control system to cause the desired change in the controlled variable. Measured variable: A variable that is measured and may be controlled (e.g., discharge air is measured and controlled, outdoor air is only measured). Microprocessor-based control: A control circuit that operates on low voltage and uses a microprocessor to perform logic and control functions, such as operating a relay or providing an output signal to position an actuator. Electronic devices are primarily used as sensors. The controller often furnishes flexible DDC and energy management control routines. Modulating: An action that adjusts by minute increments and decrements. Offset: A sustained deviation between the control point and the setpoint of a proportional control system under stable operating conditions.