VT-5005-S16
此单位允许您通过数据输入部分输入测量条件和各种其他参数。数据输入部分、旋钮、箭头键和数字键盘中可以使用三种不同的输入方法。旋转旋钮当按下带有参数的软键时，当前设置将显示在参数输入窗口中。旋转旋钮可升高或降低参数输入窗口中显示的数值（顺时针旋转可增大，逆时针旋转可减小），同时内部设置也会改变。请注意，如果粗调键打开（指示灯亮起），数值增加/减少步长将更大。箭头键(▲, ▼) 按▲ 键的作用与顺时针旋转旋钮的作用相同。同样，按下▼ 键的作用与逆时针转动旋钮的作用相同。按住箭头键0.5秒或更长时间可激活自动重复。如果选择了多标记功能，则可以使用箭头键滚动数据区域中的标记值显示。粗键您可以提高输入设置的位数或数值的增加/减少步骤。每次按此键时，该设置都会在打开和关闭之间切换。打开时，指示灯亮起。

This unit allows you to enter measurement conditions and various other parameters through the DATA ENTRY section. Three different entry methods can be used in the DATA ENTRY section, the rotary knob, the arrow keys, and the numeric keypad. Rotary knob When you press a soft key which has a parameter, the current setting is displayed in the parameter entry window. Turning the rotary knob raises or lowers the numeric value shown in the parameter entry window (turn clockwise to increase and counterclockwise to decrease), and the internal setting changes at the same time. Note that if the COARSE key is on (lamp on), the numeric value increase/decrease step will be larger. Arrow keys (▲, ▼) Pressing the ▲ key has the same effect as turning the rotary knob clockwise. Likewise, pressing the ▼ key has the same effect as turning the rotary knob counterclockwise. Holding an arrow key down for 0.5 second or longer activates auto-repeat. If the multi-marker function has been selected, the arrow keys can be used to scroll the marker value display in the data area. COARSE Key You can raise the digit of settings being entered or the increase/decrease step for numerical values. Each time you press this key the setting toggles between ON and OFF. When ON, the lamp lights.