VT-SR11-12/11/4WRD32-5X
功能部分包含17个功能键和4个辅助键。当您按下
功能键，有关该功能的信息显示在位于
在LCD显示屏的右侧。
扫掠
扫掠键包含与扫掠相关的功能。当您按下扫描键时
键，将显示用于扫掠的软键菜单。
居中
中心键包含与设置中心波长和中心相关的功能
测量频率。软键功能根据
屏幕显示模式为波长显示模式或频率显示模式。
跨度
SPAN键包含与波长SPAN或
正在测量的频率范围。软键功能根据
屏幕显示模式为波长显示模式或频率显示模式。
水平仪
标高键包含与标高轴设置相关的功能。当您按下
LEVEL键，显示用于设置参考标高的软键菜单。
安装程序
设置键包含与测量条件设置相关的功能。
缩放
缩放键包含缩放功能，允许用户自由放大或
减少测量波形，以检查测量波形的一小部分，
或检查整体波形。
此键用于设置波形放大/缩小显示条件。
显示器
显示键包含与屏幕显示相关的功能。此键用于设置
屏幕切换到上/下2分割显示模式（分割模式）。
跟踪
跟踪键包含与跟踪模式设置相关的功能。
标记器
标记键包含与标记相关的函数。
峰值搜索
峰值搜索键包含在中搜索峰值和底部的功能
测量波形。
分析
分析键包含与测量波形分析相关的功能

The FUNCTION section contains 17 function keys and 4 auxiliary keys. When you press a function key, information about the function is displayed on the soft key menu located on the right side of the LCD display. SWEEP The SWEEP key contains functions related to sweeping. When you press the SWEEP key, the soft key menu for sweeping appears. CENTER The CENTER key contains functions related to setting the center wavelength and center frequency for measurements. The soft key functions change depending on whether the screen display mode is wavelength display mode or frequency display mode. SPAN The SPAN key contains functions pertaining to settings for the wavelength span or frequency span being measured. The soft key functions change according to whether the screen display mode is wavelength display mode or frequency display mode. LEVEL The LEVEL key contains functions related to level axis settings.When you press the LEVEL key, the soft key menu for setting reference level appears. SETUP The SETUP key contains functions related to measurement condition settings. ZOOM The ZOOM key contains the zoom function, which allows the user to freely enlarge or reduce a measured waveform in order to check a small area of the measured waveform, or to check the overall waveform. This key is used to set the waveform enlarged/reduced display conditions. DISPLAY The DISPLAY key contains functions related to screen display.This key is used to set the screen to upper/lower 2-split display mode (split mode). TRACE The TRACE key contains functions related to trace mode settings. MARKER The MARKER key contains functions related to markers. PEAK SEARCH The PEAK SEARCH key contains functions for searching for peaks and bottoms in measured waveforms. ANALYSIS The ANALYSIS key contains functions related to measured waveform analysis