VT-VRPA2-2-10A/V0/T5
内存
记忆键包含将活动跟踪的内容写入
装置的内部存储器。按记忆键时，记录道和记忆列表
显示屏幕（软键菜单）。可在数据中输入存储器编号
输入部分，或使用旋钮或箭头键选择。
文件
文件键包含保存和加载波形数据、程序数据、，
以及与USB存储介质（USB存储器/HDD）之间的连接。
程序
程序键包含与控制程序功能相关的软键
通过程序进行测量。
系统
系统键包含与系统相关的功能，如单色仪调整
光学对准、波长调整、硬件设置和设置初始化。
预付款
ADVANCE键包含设置参考数据的功能，用于
测量数据和测井分析数据的对比判断。
用户
可以在用户键的软键菜单上注册常用软键。
在用户密钥中注册经常使用的软键允许您频繁执行
在少量步骤中使用函数。
复制
复制键用于将测量屏幕输出到内部打印机或文件。
按复制键时，测量的波形和列表显示在
屏幕输出到内部打印机或文件。
预设
预设键清除AQ6370D的所有内部设置，遥控器除外
接口（以太网、GP-IB和RS232）设置。
撤消/本地
撤销时，钥匙的功能根据仪器的状态而变化/
按下本地键。下表显示了键的功能。
仪表功能状态
如果在更改参数设置后按下撤消键，则允许撤消操作，
更改或删除数据等，之前的操作（更改，
删除等）和该操作之前的状态
已还原。
在用户密钥注册期间，如果在用户密钥注册期间按下了撤消键，
注册模式被取消，软键菜单
当按下系统键时显示
再一次
外部远程控制期间
PC（遥控灯亮起）
将状态从远程状态更改回本地状态
状态遥控灯熄灭。
“帮助”
按下帮助键时，当前显示屏幕的软键菜单为
显示的说明。
用于选择“更多信息”的软键，指示其他信息包括
通过帮助屏幕中的一些软键显示。

MEMORY The MEMORY key contains functions for writing the contents of the active trace to the unit’s internal memory. When you press the MEMORY key, the traces and memory list screen (soft key menu) are displayed. A memory number may be entered in the DATA ENTRY section, or selected using the rotary knob or arrow keys. FILE The FILE key contains functions for saving and loading waveform data, program data, and the like to and from USB storage media (USB memory/HDD). PROGRAM The PROGRAM key contains the soft keys related to program functions for controlling measurements through a program. SYSTEM The SYSTEM key contains system-related functions such as monochromator adjusting optical alignment, wavelength adjustment, hardware setup, and setting initialization. ADVANCE The ADVANCE key contains functions for setting reference data used to make comparison judgments on measured data and for logging analysis data. USER Frequently used soft keys can be registered on the soft key menu in the USER key. Registering frequently used soft keys in the USER key allows you to execute frequently used functions in a small number of steps. COPY The COPY key is used to output the measurement screen to the internal printer or a file. When you press the COPY key, the measured waveforms and lists displayed on the screen are output to the internal printer or a file. PRESET The PRESET key clears all internal settings of the AQ6370D except for the remote interface (ETHERNET, GP-IB, and RS232) settings. UNDO/LOCAL The key’s function changes depending on the status of the instrument when the UNDO/ LOCAL key is pressed. The following table shows the key’s functions. Status of Instrument Function UNDO action is allowed If the UNDO key is pressed after changing parameter settings, changing or deleting data, etc., the previous action (change, deletion, etc.) is canceled and the state preceding that action is restored. During user key registration If the UNDO key is pressed during user key registration, registration mode is canceled and the soft key menu which appeared when the SYSTEM key was pressed is displayed again. During remote control by external PC (Remote light is on) Changes the state from the remote state back to the local state. The remote light turns off. HELP When you press the HELP key, a soft key menu of the currently displayed screen is displayed explanations. Soft keys for selecting the “MORE INFO” which indicate additional information are displayed by some soft keys in HELP screen.