VT5008-17
1个LCD显示屏显示测量波形、测量条件、测量值，etc.2用于执行分配给LCD显示器右侧软键的功能的软键部分3用于输入与所有测量（扫描、测量条件、数据分析和各种功能）相关的设置的功能部分4用于测量条件参数输入、标签输入、，etc.5用于启动和关闭仪器的电源。6用于连接USB存储介质的USB接口7撤消/本地请参阅下表（1.3面板按键和旋钮）8用于检查屏幕上显示的软键菜单内容的帮助。9光输入光输入连接器10校准输出参考光源用于校准调整和波长校准的光输出连接器（当内置光源规格为-L1时）11复制将屏幕另存为图像文件。12预设清除AQ6370D的所有内部设置，但远程接口（以太网、GP-IB和RS232）设置除外。

1 LCD display Displays measured waveform, measurement conditions, measurement values, etc. 2 Soft key section Used to execute the functions assigned to the soft keys on the right side of the LCD display 3 FUNCTION section Used to enter settings pertaining to all measurements (sweep, measurement conditions, data analysis, and various functions) 4 DATA ENTRY section Used for measurement condition parameter input, label input, etc. 5 POWER Used to start and shut down the instrument. 6 USB interface Used to connect USB storage media 7 UNDO/LOCAL See the following table(1.3 Panel keys and Knobs) 8 HELP Used to check the contents of the soft key menu displayed on the screen. 9 OPTICAL INPUT Optical input connector 10 CALIBRATION OUTPUT Reference light source optical output connector used for alignment adjustments and wavelength calibration (when the built-in light source specification is -L1) 11 COPY Save the screen as an image file. 12 PRESET Clears all internal settings of the AQ6370D except for the remote interface (ETHERNET, GP-IB, and RS232) settings.