12P3162X162 SLS 1508
Monitor is part of the AMS 6300 SIS Overspeed protection system and is mounted in a 19” rack (84HP width and 3RU height) in combination with the A6371 system backplane. One AMS 6300 SIS consists of three Protection monitors (A6370) and one backplane (A6371). The system is designed for use with Eddy-Current sensors, Hall- Element sensors and Magnetic (VR) Sensors. Sensor Voltage Supply Nominal supply voltage -24.5 V ±1.5V DC Short-circuit proof, galvanically seperated Max. Current 35 mA Signal Input, Eddy current & Hall element Sensors Input signal voltage range 0 V to 26 V (+/-) Protected against reverse polarity Limit range ± 48 V Frequency range 0 to 20 kHz Input resistance Typical 100 kΩ Signal Input, Magnetic (VR) Sensors Input signal voltage range Min. 1 Vpp, max. 30 V RMS Frequency range 0 to 20 kHz Input resistance Typical 18 kΩ Digital Input (Backplane) Number of Inputs 4 (galvanically separated with common ground of all digital inputs) (Test Value 1, Test Value 2, Enable Test Values, Reset Latch) Logic low level 0 V to 5 V Logic high level 13 V to 31 V, open Input Resistance Typical 6.8 kΩ Current Output (Backplane) Number of Outputs 2 Electrically isolated with common ground Range 0/4 to 20 mA or 20 to 4/0 mA Accuracy ±1% of full scale Maximum load <500 Ω Max. output current 20 mA

监视器是AMS 6300 SIS超速保护系统的一部分，与A6371系统底板一起安装在一个19英寸的机架（84HP宽，3RU高）中。一个AMS 6300 SIS由三个保护监视器（A6370）和一个背板（A6371）组成。该系统设计用于涡流传感器、霍尔元件传感器和磁性（VR）传感器。传感器电压电源标称电源电压-24.5 V±1.5V DC防短路，电隔离大电流35 mA信号输入，涡流和霍尔元件传感器输入信号电压范围0 V至26 V（+/-），防止反极性限制范围±48 V频率范围0至20 kHz输入电阻典型值100 kΩ 信号输入，磁性（VR）传感器输入信号电压范围小1 Vpp，大30 V RMS频率范围0至20 kHz输入电阻典型18 kΩ 数字输入（背板）输入数量4（与所有数字输入的公共接地电隔离）（测试值1、测试值2、启用测试值、复位锁存）逻辑低电平0 V至5 V逻辑高电平13 V至31 V，开路输入电阻典型值6.8 kΩ 电流输出（背板）电隔离输出2的数量，公共接地范围为0/4至20 mA或20至4/0 mA，精度为满标度大负载的±1%＜500Ω 大输出电流20 mA