1X00163H03
z在DeltaV Explorer中配置。所有需要的配置
对于以太网设备，在DeltaV Explorer和
DeltaV Control Studio，就像传统的输入/输出信号一样。
可在DeltaV控制模块中配置数据，
显示在DeltaV Live和DeltaV Operate图形上，
并保存在DeltaV Continuous Historian中。
„模块化，易于添加冗余。双水平
carrier承载冗余
设置（冗余电源输入端子和冗余
以太网隔离端口）。EIOC变得冗余
只需在双水平面上添加第二个EIOC
载体配置将自动更改，
确认两个EIOC现在作为
冗余对。可控制手动切换
在DeltaV Diagnostics Explorer中。冗余以太网
端口在DeltaV控制网络之间提供隔离
通信和冗余以太网设备网络。
EIOC还实现了并行冗余协议
（PRP）增加了一层稳健性，提供无缝
主网络和辅助网络之间的切换。
产品描述
EIOC是集成来自
第三方以太网设备，如PLC和智能现场设备
如智能现场设备（IFD）和智能电子
设备（IED）。这些以太网设备的网络可以
直接连接到EIOC。以太网设备可以
使用五种协议之一与EIOC通信；
Modbus TCP、以太网/IP、IEC61850 MMS、OPC UA客户端
和以太网/IP控制标签集成。EIOC连接
直接进入DeltaV控制网，并可放置
远程安装在现场的机柜中。
EIOC是一个独立的嵌入式数据服务器。这意味着
无需单独的控制器来处理
正在将数据集成到EIOC中。需要控制模块
要处理来自以太网设备的数据，请分配和
在EIOC中执行。这样，与
设备快速且直接。模块中的任何参数
在EIOC中运行时，S系列和M系列都可以读取
控制器在控制中需要时使用外部引用
控制器级别的策略。

z Configured in DeltaV Explorer. All needed configuration for the Ethernet Devices is done in DeltaV Explorer and DeltaV Control Studio, just like Traditional I/O signals. The data can be configured in DeltaV Control Modules, displayed on DeltaV Live and DeltaV Operate graphics, and stored in the DeltaV Continuous Historian. „ Modular and Easy to add Redundancy. The dual horizontal carrier hosts all the needed components for a redundant setup (redundant Power input Terminals and redundant Ethernet Isolation ports). The EIOC becomes redundant just by adding a second EIOC on the dual horizontal carrier. The configuration will change automatically, confirming that the two EIOCs are now working as a redundant pair. Manual switchovers can be controlled in DeltaV Diagnostics Explorer. The redundant Ethernet ports provide isolation between DeltaV Control Network communication and the redundant Ethernet Device Network. The EIOC also implements Parallel Redundant Protocol (PRP) for an added layer of robustness, providing a seamless switchover between primary and secondary networks. Product Description The EIOC is a big pipe for the integration of process data from 3rd party Ethernet Devices, such as PLCs and smart field devices such as Intelligent Field Devices (IFDs) and Intelligent Electronic Devices (IEDs). A network of these Ethernet Devices can be directly connected to the EIOC. The Ethernet Devices can communicate to the EIOC using one of five protocols; Modbus TCP, EtherNet/IP, IEC61850 MMS, OPC UA client and EtherNet/IP Control Tag Integration. The EIOC connects directly into the DeltaV Control Network and can be placed remotely in an enclosure in the field. The EIOC is an independent embedded data server. This means that there is no need for a separate controller to process the data being integrated into the EIOC. Control Modules needed to process the data from the Ethernet Devices are assigned and executed in the EIOC. In this way, communications with the devices are fast and direct. Any parameters from the modules running in the EIOC can be read by both S-series and M-series controllers using External References when needed in control strategies at the controller level.